Portable drilling locator woodworking drilling locator drilling guideFeatureSome of us can pick up a drill bit, place it on the workpiece and drill a straight hole. Then, there is our remaining 99.9%. Drilling machines can solve this problem... as long as the workpiece you want to drill is suitable. However, if you are not one of the 0.1%, and you want to drill in the middle of a large piece of plywood or in an installed cabinet or wherever you cannot use a drill press (or you don’t want to have a drill press), this new tool can drill holes in you Keep your drill bit perfectly vertical, but it goes O NE STEP further. We have added a multifunctional base and fence system so that you can easily keep the hole position on the target.The automatic line starts with a high-quality 1/2" chuck supported by a pair of sealed ball bearings. The shaft end is a standard quick release accessory, suitable for any cordless or corded electric drill...even an impact driver. The chuck holder is equipped with a pair of poly Tetrafluoroethylene sleeve, used to ride on two stainless steel posts to keep the chuck completely vertical when drilling. One post has a spring to help you control your cutting, and the other post has an adjustable stop ring . Note that there is a taper on the stop ring column. Stop only by pressing with your fingertips to keep the position... When it is locked to the taper, it is almost impossible to knock the stopper out of position.-Line's base has a laser-engraved centerline around the opening. Just align the bright white index mark with the witness mark on your stock to get the precise hole location. There is a V-shaped groove on the base, which can safely drill round blanks. The opening in the base allows a G A P for the drill bit, which can be up to 1 inch. When you need to drill a hole larger than 1", just remove the column cover, turn the chuck bracket so that it is on the outside of the base, and then drill a hole up to 2".
Trustpilot
2 weeks ago
1 month ago